Pneumatic punching machine JL-D003C

Product Feature

♦ The machine can be operated manually or by foot switch;  

♦ With air pressure regulating knob, you can manually adjust the size of the air pressure of the inlet pipe for pressure regulation, which can be applied to more material fabrics; 

♦ The size of punching holes can be made according to the actual requirements of the mould, which can be used for punching holes of various sizes, more personalised; 

♦ Faster punching speed than traditional process, improve production efficiency and save time cost;  

♦ Stable operation of the equipment, consistent size of punched holes, more beautiful than the traditional process;

  Technical Parameter
 

 
Product description 

♣ The equipment is suitable for punching textile and leather products, the pressure is adjusted by pneumatic pressure to press the hole shape through the mould;

♣ The machine is equipped with timing adjustment, which can manually adjust the interval of punching time to regulate the speed of punching; 

♣ The machine is equipped with manual and foot switches, so that you can choose the suitable operation mode to operate the machine, which is easy to operate; 

♣ After plugging in the power socket, rotate the power switch to the right to start the device, the power indicator light turns on, adjust the air pressure and timing figures, and choose to run the device in manual or foot pedal mode;  

♣ Please do not put your hands on the punching worktable during the working process to prevent being injured by the machine accidentally, and turn off the power in time when the personnel leave or do not use the equipment;