Universal gluing machine JL-176

Product Feature

♦ The thickness and width of gluing can be adjusted to better adapt to the requirements of different materials;

♦ The gluing speed can be adjusted according to the actual requirements;  

♦ Uniform gluing, no glue dripping, no glue leakage, good gluing effect, more beautiful products;

♦ Stable operation of the equipment, simple operation of gluing, which can improve the production efficiency and save time and cost; 

♦ Sealed gluing, glue is not easy to evaporate, save glue, reduce production cost;

    Technical Parameter

 
Product description 

♣  Before starting the device, it is necessary to confirm that the power supply is 220V before turning on the power switch;

♣  Before turning on the power, confirm whether the speed adjustment knob is reset to zero. If the power is turned on without resetting, it will cause the circuit and motor to burn out, increasing unnecessary losses;

♣  Please be sure to use a 5A fuse. If a fuse exceeds 5A, it will not provide protection and cause the circuit to burn out;

♣  Turn the rubber cylinder to the upright position during work and to the inverted position during rest;

♣  Do not touch the rubber wheel with the embossing wheel of the rubber head;

♣  Wash the adhesive on the surface of the adhesive head with white electric oil when stopping using the equipment;

♣  When reusing, it is necessary to first rotate the rear handle of the motor by hand to check if the rubber head is stuck or dry before starting use;

♣  During use, do not place your hands near the feeding area;

♣  Do not disassemble or clean the adhesive head;