JL-MZ004 Automatic Riveting Machine

Main use: Used for riveting automotive clutch plates.

Scope of application: Riveting distance range: 130-300mm; Riveting outer diameter range: 160-330mm.

Main features: 1. Equipped with automatic feeding function for rivet sorting and arrangement; It can also be cut unilaterally to achieve single point riveting;

2. When changing the product type, it is necessary to replace the indexing fixture, upper punch module, and rivet feeder as a whole, with a change time of less than 20 minutes;

3. The device has counting and overload protection functions;

4. Using a pressure sensor to control the riveting force of the gas-liquid booster cylinder, the riveting force can be adjusted according to product requirements;

5. The pre pressure is achieved by adjusting the compression amount of the spring on the fixture;

6. Using a servo motor to control the rotation angle of the fixture, with an accuracy level of ± 1 ';

7. The equipment is controlled by a PLC programmable logic controller, and the setting program can be saved. The program should include a program that can achieve single point riveting;

8. Equipped with rivet material shortage shutdown function, it can shut down for protection when rivet material shortage occurs, and automatically operate after manual replenishment;

Partial parameters: